The SIMCLINE Companion App (for Android smartphones) can be paired with SIMCLINE, over a secured and authenticated connection, instead of the cycling App (Zwift)! During SIMCLINE startup when the cycling App is not activated yet and after a ride when the cycling App is disconnected. The Companion App allows for the dynamic setting of some preferences like Ascent Grade Limit (between 0-20%), Descent Grade Limit (between 0-10%), Road Grade Change Factor (between 0-200%) and for simple manual control/testing of the Up and Down movement. The preferences will be stored in ESP32 NVS (Non-Volatile-Storage) when you send them to the SIMCLINE. Every following bootup will reactivate your preferences!
This folder contains files for the Android companion app for the Simcline-V2 library.
Simcline_v2_5_2.aia: The project file for MIT App Inventor. Use this to modify or rebuild the app.Simcline_v2_5_2.apk: The pre-built Android app. Install this on your Android device to configure and simple control the SIMCLINE.
The Android app is built with BluetoothLE version: edu.mit.appinventor.ble-20240822.aix
- To install the
.apk:- Transfer the file to your Android device.
- Enable installation from unknown sources in your device settings.
- BLE Location must be enabled in advance or when requested.
- Open the file to install the app.
- To modify the app, import the
.aiafile into MIT App Inventor.
A dedicated program for testing the functioning of Simcline and Smartphone, over a secured and authenticated connection, is available at: /Simcline-V2/examples/Test_Simcline_App_Connection to help you with the task! Notice that the security PIN when the two pair is: 123456