PCB v2

[SerjSanchez]

Some modifications for future versions of the PCB:

• Add regulation capacitors for the DC/DC converter.
  • 10uF/50V in. 22uF/10V out.
• Add reference for AP7313-12SAG-7 to remember the exact model
  • Change the VDDD input capacitor (C6) to 0.1uF.
• Redesign PCB to achieve less than 10cm length.
  • Remove components for the development board.
    • The buttons may be used in the future. Just change the footprint and place them better.
  • Check that the battery actually fits in the box along with the PCB.
• Check Silkscreens.
  • 3V3 silk at converter should be 9V.
• Check routes.
  • Change C2 via to avoid the pad.