This example fetches the data from the controller and prints it to the console. You have the option to print it out in a text or json format.
If you encounter any issues, create an issue and I'll try to help.
You will need to enable serial on the raspberry pi, I used this guide: https://pimylifeup.com/raspberry-pi-serial/
You may also need to switch the serial device depending on what Pi or other device you are using.
- 1 x Raspberry Pi
- 1 x RS232 transceiver module. Ex: MAX3232 Module
- 1 x 6P6C (RJ12) Straight Cable (Double check wire colors against 6P6C-Connector.jpg)
See other pictures for different perspectives.
