SSD201 and displays

[suarezvictor]

Hi everyone, I've got recently insterested on MStar chips

I know according to @fifteenhex that display control wasn't achieved yet
It seems that there are leaked SDK headers and .a binaries that may be useful to control a display, see github project referenced here http://dev.comake.online/forum.php?mod=viewthread&tid=54&extra=page%3D1

People at widora are also getting display output with the new SSD210 chip (QFN68), seewidora forums
I asked on that forum about the means to get it working.

Additionally, FYI, the guys from widora are planning a module pretty similar yo Industio's one as I've seen at the Telegram forum,
https://t.me/widora

Do you have another info in regards to display output? As far as I'm collecting useful information I'll post it here

[fifteenhex]

I've added two links into the u-boot source here:

https://github.com/linux-chenxing/linux-chenxing.org/blob/master/ip/index.md#display-pipeline

From what I can tell their u-boot supports a bootlogo feature that allows putting a logo on the screen before Linux starts.
There should be enough info there to get a basic framebuffer working.

If you want I can buy you a SSD202D board with display so you can work on this?
If we can get it working for the SSD202D then getting it working for the SSD210 should be a piece of cake as SigmaStar just reuse the same blocks in different combinations for their chips.