Preparation

Getting Started

Before installing NETHERCAP on your ESP8266, ESP32, or BW16. You must prepare these things:

ESP8266

1. Any ESP8266-based microcontroller. NodeMCU Lolin/Amica and WeMos D1 Mini/Pro are supported
2. PC with CH340 AND CP210X driver installed (recommended).
3. Smartphone (optional)
4. USB cable that supports data transfer
5. 0.66/0.96/1.3 Inch OLED using SSD13016 or SH1106 driver (optional)
6. 5 x tactile buttons (optional)
7. 2 x 100K Ohm resistor (optional)

BW16

1. BW16 with CH340 USB to Serial chip included
2. PC with CH340 AND CP210X driver installed